Transform your home with our 3D static no-glue decorative privacy window films! These films offer excellent privacy protection, blurring unwanted views while adding a simple matte white touch to your space. They cling to the glass surface without glue, ensuring extra safety and convenience. Installation is a breeze - just peel and stick, and they're easy to remove and re - apply multiple times.
Why choose us?
- TOP - level Privacy Protection: Feel secure in your own home.
- Glue - Free: Install with water, no toxic glue needed.
- UV Protection: Block 96% of harmful UV rays.
- User - Friendly: Hassle - free peel - stick application, leaving no damage or residue when removed.
- Reusable: Made of premium PVC material for extra durability, can be re - positioned and reused.
- Energy Saving: Reduce hot spots in summer and retain heat in winter to control energy costs.
Package includes 1 x Privacy Window Film.
Installation Instructions:
1. Thoroughly clean the target surface.
2. Measure the surface and cut the film, leaving an extra inch margin on each side for adjustment.
3. Fill a spray bottle with enough water.
4. Spray the surface with water and peel off the transparent backing film along a short side.
5. Install the film on the window.
6. Use a squeegee to remove excess water and bubbles while applying the film, then wipe off the water with a towel.
7. Trim off the margins.
Useful Tips:
- In cold weather, blow hot air on the film with a hair dryer (heat - resistant up to 176°F) before installation.
- The film works only on flat, clean, and smooth surfaces.
- Affix a scotch tape on a corner of the back side to quickly remove the backing film.
Using our 3D static no - glue decorative privacy window films is easy. First, clean the window surface well. Then measure the window and cut the film, leaving a little extra on each side. Fill a spray bottle with water and spray the window. Peel off the backing film and place the film on the window. Use a squeegee to get rid of water and bubbles, and then wipe up the remaining water. Trim the edges when you're done.
When it's cold outside, use a hair dryer to warm up the film before installing. Make sure the window is flat, clean, and smooth. To make removing the backing film easier, put a piece of scotch tape on a corner of it.
To maintain these films, just clean them with a soft cloth and mild soap. They are made of durable PVC, so they can be used again and again. If you need to re - position the film, it's no problem. Just peel it off gently and put it back in place.
